|
1.0 PURPOSE:
Ensuring the operation of
Powder filling machine in a proper way.
2.0 SCOPE:
This SOP applies for the proper
use of Powder filling machine.
3.0
DEFINITION: Nil.
4.0
RESPONSIBILITY: Engineering
Incharge, Machine operator.
5.0 PROCEDURE:
5.1 Set the turntable guide as per the require
bottle size for filling.
5.2 Set the conveyer guide as per the bottle
size.
5.3 Place the separation as per the bottle
size.
5.4 Set the height of the filling head as per
the bottle size i.e the gap should be
4
mm to 5 mm between bottle & Nipple.
5.5 Check
the humidity of the room it should must be 30 to 35.
5.6 Start the main rotary switch.
5.7
Keep the dose switch off & press the START switch to run the
machine.
5.8 Run the empty bottles on the conveyor to
check the smooth transportation of
The bottle from start to end of the conveyor.
5.9 Fill the powder into the hopper.
5.10 Set
the time of the timer to fill the require dose into the bottle.
5.11 MOVE
the ROD FOR POWDER FLOW ADJUSTMENT part no. 7.5 to fill
The powder into the glass jar. The level of the powder should must be
at
Middle of the glass jar. Always maintain the level of the powder to
reduce the
Weight variation.
5.12 on
the dose switch to fill the powder into the bottle.
5.13
Checks the weight of fill the powder into the bottle.
5.14 A
metal proxy is provided to start augur when the bottle stops at the separator
|
|
5.15
The machine stops by pressing stop key.
5.16
LIMIT SWITCH FOR CLUTCH stops the machine when any
bottles dose not
Insert into the separator
properly.
|
